هيئة المواصفات والمقاييس العربية السورية The Syrian Arab Organization For Standardization & Metrology

الأنابيب المصنعة من الألياف الزجاجية عالية الضغط-الجزء:2


55000 ل.س


الحالة التشريعية

وطنية - معتمدة - غير الزامية

العنوان بالانكليزية

Specification for high pressure fiberglass line pipe

المجال عربي

تم صياغة هذا الجزء من هذه المواصفة القياسية السورية لتوفير إمكانية استخدام آمن لأنابيب الألياف الزجاجية عالية الضغط الآمنة والمتغيرة الأبعاد والوظيفة بمعدل ضغط يتراوح من ((500 lbf/in2 إلى (5000 lbf/in2) (3.45 MPa to 34.5 MPa)، متضمنة زيادة قدرها 250 lbf/in2 (1.72 MPa) للأنابيب التي يقل قطرها عن NPS 12 وبزيادة قدرها 100 lbf/in2 (0.69 MPa) للأنابيب التي يزيد قطرها عن 12 NPS. يوفر هذا الجزء من هذه المواصفة التوصيلات الميكانيكية وتوفر متطلبات الأداء والتصميم والمواد والاختبارات والتفتيش والعلامات والمناولة والتخزين والشحن. تعتبر المكونات الأكثر أهمية هي عناصر المعدات التي لها متطلبات محددة في هذا الجزء من هذه المواصفة.

المجال انكليزي

This part of Syrian National Standard was formulated to provide for the availability of safe, dimensionally, and functionally interchangeable high-pressure fiberglass line pipe with a pressure rating from 500 lbf/in.2 to 5000 lbf/in.2 (3.45 MPa to 34.5 MPa), inclusive, in 250 lbf/in.2 (1.72 MPa) increments for pipes ≤ than NPS 12 inches and 100 lbf/in.2 (0.69 MPa) increments for pipes ˃ than NPS 12 inches

مراجع انكليزية

[1] API Specification 15LR, Specification for Low Pressure Fiberglass Line Pipe [2] ASME B31.4 , Pipeline Transportation Systems for Liquids and Slurries [3] ASTM D1598, Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure [4] ASTM D2143, Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

t> });